Ortofon MC Cadenza Mono

The Cadenza Mono model is made with a Nude Fine Line stylus and a cylindrical aluminum cantilever. The stylus radius is r/R 8/40 µm.

The coils are made from 6NX (99.9999 %) pure silver wire. An improved winding process on the armature allows a better channel balance. 

For easy use, the pins are connected so you get the same signal from both pairs of connecting pins.

Sharing internal build with the Cadenza Red and with optimized adjustments for mono playback the sound is relaxed, homogeneous, and moderate.

Specifications

Output voltage at 1 kHz 5 cm/sec - 0.45 mV
Frequency response 20 Hz - 20 kHz - +3/-1
Tracking ability at 315 Hz at recommended tracking force *) - 70 μm
Compliance, dynamic, lateral - 12 μm/mN
Stylus type - Nude Fine Line on Alu cantilever
Stylus tip radius - r/R 8/40 μm
Tracking force range - 2.2-2.7 g (22-27 mN)
Tracking force recommended - 2.5 g (25 mN)
Tracking angle - 20º

*) Typical value