DAC 8 DSD High End D/A-Converter-Preamp
Fundamentally our new DAC 8 DSD is capable of doing everything necessary to convert every form of digital source into analogue signals at the very highest quality, including DSD right up to the highest possible resolution. We have again further improved the unit’s outstanding pre-amplifier, and incorporated a volume control of fully analogue construction based on High-End Melf resistors. The “State of the Art” output stage is of fully symmetrical design and discrete construction. Its impedance is very low, and it is equipped with symmetrical (XLR) and asymmetrical (RCA) outputs. These features make the DAC 8 DSD more than just a High-End converter: it is also a High-End preamp of supreme quality. The seriousness of our claim that the DAC 8 DSD is one of the world’s finest high-end converters can be judged by the fact that we employ two separate, sophisticated mains power supplies for the analogue and digital sections. A volume control is another unusual feature in a DAC, but it makes good sense if the user wishes to install active loudspeakers, or employ the DAC 8 DSD as a pre-amplifier in conjunction with external power amplifiers. The volume control is of highly refined design, and exploits analogue control elements down to low volumes, as they avoid any loss of dynamic quality even at low listening levels. Two gold-contact relays are provided to by-pass the volume control, i.e. it can be removed entirely from the signal path when not required. We placed particular emphasis on the development of a very good headphone amplifier with the ability to handle high currents. This further widens the practical applications of the DAC 8 DSD.
The core of the DAC 8 DSD is the converter. As in our high-end players this device also employs the superior quadruple arrangement with eight 32-bit converters from Burr-Brown in a double symmetrical circuit. This circuit provides perfect compensation for non-linearities, and the residual background noise – which is excellent in any case with the 32-bit converters we employ – is reduced by approximately a further 6 dB. The result is a dynamic performance which is hardly capable of improvement, with a perfect “black level”, extreme linearity and freedom from distortion, even in critical passages and the most minute musical details. Oversampling is carried out by a modern 56-bit signal processor, for which T+A has developed algorithms specific to our equipment, offering perfect timing characteristics. They are based on Bezier polynomials: Bezier interpolation and Bezier / IIR combination. A standard FIR filter and a short FIR filter are also provided. These options make it possible to select the optimum sound quality to suit the individual piece of music. The DAC 8 DSD can even invert the absolute phase of the audio signal at the digital level, and thereby correct material recorded with incorrect absolute phase.
For the purpose of handling DSD data which can be supplied via the PC-USB input we have developed a unique, dedicated converter: the T+A True One Bit DSD Converter. This is of fully analogue construction and constitutes a genuine one-bit converter, since – unlike other manufacturers – we did not want to use the DSD mode of a PCM converter. This development ensures that DSD data are processed in a genuine one-bit stream process, uncoloured and without detrimental additional conversion, as in our PDP 3000 HV High-End DSD / PCM player.
Fifteen long years ago we developed a means of galvanically separating the converter from the analogue section for use in our high-end players: this provides complete galvanic isolation of the digital section from the analogue section using extremely fast digital isolators made by Silicon Labs in the DAC 8 DSD. The result is to prevent any interference from the source devices finding its way into the analogue section. Computers, in particular, generate enormous levels of interference noise which would ruin the superior sound qualities of the audiophile output stage without this measure. The “State of the Art” analogue stages are of fully discrete and symmetrical construction, and do not employ OP-AMPs. Their linearity is not a function of “hard” negative feedback, as is typical of OP-AMPS, but rather due to the quality of the circuit design and the components employed, which are selected and matched to very fine tolerances. A further unique feature of the DAC 8 DSD is its switchable analogue bandwidth, which has already proved so effective in our high-end players. The limit frequency of the DAC 8 DSD’s analogue reconstruction filter can be switched between 60 kHz and 120 kHz; the “ultra-wide” 120 kHz setting is the key to perfect frequency response and phase characteristics when used with power amplifiers with a broad-band output – such as those in the T+A range, naturally. The phase linearity and signal fidelity of the “ultra-wide” circuit also has a perceptible effect in the audible range, and allows an open sound image with phenomenally clear positioning and ultra-lively dynamics.
32-Bit Sigma Delta, 352,8 kSps/384 kSps. Eight times oversampling.
Upsampling: free programmable signal processor with four selectable oversapling algorithims. FIR kurz, FIR lang, Bezier/IIR, Bezier
In- / Outputs
1 x opt. TOS-Link, 1 x BNC,
1 x AES/EBU; 32 kSps; 44,1 kSps; 48 kSps; 88,2 kSps; 96 kSps; 176,4 kSps; 192 kSps; 16/24 Bit
PCM-Mode: 44,1 kSps; 48 kSps; 88,2 kSps; 96 kSps; 176,4 kSps; 192 kSps;
352,8 kSps; 384 kSps; 16/24/32 Bit
DSD-Mode: DSD64; DSD128; DSD256; DSD 512; (MAC OS up to DSD 128)
Mains / Accessories / Dimensions
asynchronous drivers for Windows are available on T+A homepage for download