Trinnov ST2-HiFi-NOT AVAILABLE FOR ONLINE PURCHASE

STEP INTO A WORLD OF ACOUSTIC FIDELITY

Typical rooms introduce up to 10dB of distortion in the frequency response. Furthermore, loudspeakers with a perfect impulse response don’t exist. The Trinnov’s ST2-HiFi solves this acoustic equation. It takes your high-end system to a whole new level of accuracy, from high-fidelity to acoustic-fidelity.

EASY SET-UP

Insert the system btw your pre-amplifier and the amplifiers, then connect the microphone Run the step-by-step calibration wizard Select one of the 5 automatically generated compensations Change the target curves and other optimization parameters Store up to 6 customizable profiles and 29 user-defined presets

POWERFUL ALGORITHMS

Multi-point measurements of all loudspeakers Time-frequency analysis: the loudspeaker and the room are separately equalized Automatic optimization of amplitude and phase response according to Target Curves Intelligent active crossovers: automatic alignment of delays and gains for every driver

FLEXIBLE FINE TUNING

Comprehensive acoustical graphs Optimization parameters: maximum boost, maximum attenuation… Manual FIR, parametric and graphic EQs

REMOTE CONTROL

From any PC, Mac, iPad, iPhone or Android phone (from a VNC client app, through the network) Using an external monitor, mouse, and keyboard Real-time control of the processor

SPECIFICATIONS

ANALOG I/O

• 4 single-ended channels inputs via 4 x cinch (10k Ohms)
• 4 single-ended channels line/phono inputs via 4 x cinch (100k Ohms)
• 4 balanced channels inputs via 4 x XLR (20k Ohms)
• 4 balanced channels outputs via 4 x XLR (100 Ohms)

DIGITAL I/O

• AES I/O
• 2 channels inputs via 1 x XLR (110 Ohms)
• 2 channels outputs via 1 x XLR (110 Ohms)

• SPDIF
• 2 channels inputs via 1 x cinch (75 Ohms)
• 2 channels outputs via 1 x cinch (75 Ohms)

AUDIOPHILE GRADE PERFORMANCE

• Adc Resolution / Sampling Rate:24 Bits/96 kHz
• Dac Resolution / Sampling Rate:24 Bits/192 kHz
• A/D Signal-To-Noise Ratio:119 dB (A-Weighted)
• Thd+D Adc:-103 dB
• D/A Signal-To-Noise Ratio:118 dB (A-Weighted)
• Thd+N Dac:-98 dB
• Clock / Jitter:Variations Under 25Ps Are Recovered, Jitter Attenuation Superior To 50 dB Is Achieved

REMOTE ACCESS

The ST2 HiFi has a built-in Ethernet network port which allows it to connect to your local ethernet network. VNC is the easiest solution to control the ST2 HiFi through the network from any tablet, computer or smartphone. The optional Wi-Fi USB dongle adds wireless capabilities. It allows the ST2 HiFi to connect to your existing Wi-Fi network, or to act as a Wi-Fi access point (AP).

PROCESSING SECTION

• Processor:Intel Dual-Core 1,8 GHz
• Data width:64 bits, floating point
• RAM:1 Go DDR3
• Storage:Flash Drive 1 GB
• Cooling system:Custom heat sinks + additional slow fans
• Maximum Number Of Processing Channels : 4 Channels At 96 kHz

PHYSICAL CHARACTERISTICS

• Chassis: 2U
• Power supply: 240V AC / 50-60 Hz. Option: 130V AC
• Consumption: 90 W max.
• Weight: ∼9.4kg
• Environmental conditions:
• Operating: 0°C – 40°C (32°F – 104°F)
• Humidity: 20% – 80% relative humidity(without condensation)